SRITECS-  Global  Market Access for Export of Products and Imports of
Requirements


Well Maintained Used Plant and Machinery from SRITECS


From Established  Sellers of  Proven Reputation for Quality of the Units offered
Used Plant and Machinery of World Famous  Machinery Manufacturers, taken
out or still in use  between 2005 and 2015 years are offered by SRITECS for
replacement, Rehabilitation and Plant expansion for different Sectors of
Industry and Engineering services to assist  as follows;


Engineering Services
•        Early Engineering services, Feasibility Studies, Front End Engineering
Design (FEED) , Engineering package, Engineering design contracts, Process
Design, Detailed Engineering,
•        EPC contract – Engineering, Procurement, Commissioning
•        (EPCC) Engineering, Procurement, Construction and Commissioning
•        EPCM contract , Lump Surn key (LSTK) contractors

Production Services: Support, management, and consulting services

Project   Management services; Project management consultant (PMC), Project
management services
Transportation

Construction
: Site Preparation & Civil Works, Fabrication, Installation of
equipment, Mechanical work, Pipe Lines, Process Units, Utilities
#  Construction of Heavy Industrial , Petroleum and  Oil Field Projects,  #
Power Plants and Projects,

New or Used Plant and Machinery as available

Agro Machinery

Tractors 110-130HP, &5- 115 HP, Four wheel drive- 370-620 HP Tractors,
Scrapper
Row Crop Tractors 210-290 HP, 245- 370 HP
Planting & Seeding equipment- Section Command Wireless Conveyance,  with
Row Units, Air seeding Equipment, Box drills
Grain Harvesting-  Combines, self propelled Wind rowers, Header Equipment,
Frontier Harvest Equipment,
Hay & Forage- Disc mowers, Flail Chopper, Forage Harvesters, Wind rowers,
Wheel Rakes, Frontier Hay Equipment,
Tillage- Discs, Nutrient Applicators, Primary Tillage, Secondary Tillage,
Vertical Tillage
Material Handling- Utility Loaders, Agriculture Tractor Loaders
Frontier Implements- Harvest Equipment, Hay Equipment, Mowing
Equipment, Seeding Equipment, Snow removal equipment, Tillage Equipment
Self-Propelled Sprayers
Cotton Harvesting- Stripper- Horsepower        190, Basket Capacity        808 cu.
ft.Weight (4-Row) 17,000 lb.Round module wrap, 6-row or 8-row header
options, 500 horsepower
Sugar Harvesting SUGARCANE HARVESTER- -  -High-Reach Topper With
unmatched 17-ft (5.2-m) topper reach, Crop Dividers

Used Tractors
2012 John Deere S680- 1209 hrs,
2011 John Deere 8285R 2222 hrs,
2012 John Deere 672G 1757 hrs,
2011 Case IH Puma 140 1653 hrs,
2014 John Deere 210GL- 1574 hrs,

Cement  and Building Machinery
100000 Tpy White Cement Plant, Fls Kilns
400000 Tpy Dry Process Cement Plant, VRM Raw, 50hz
500000 Tpy Cement Plant Preheater-Precalciner, 50hz
Unused Cement Plant, 750000 Tpy Clinker
1 Mtpy Cement Plant 4-Stg Precalciner, VRM Raw Mill
1.5m Tpy Cement Line Vrm, P/H Kiln, Cooler, 2 Cement Mills, 60hz Unused
Dual Line Trio Jaw Crusher & Incline Screen Plant
Sandvik Crushing Plant, Jaw, 2 Cone Stages, 550tph, Unused
800 Tph Metso Crushing Plant
Metso Hp400 Cone Crusher Plant
Nordberg Lt125 Lokotrack, C125 Jaw & Grizzly Feeder, 800tph
48" X 60" Kue-Ken Jaw Plant
800000 Tpy Slag Grinding Plant, Vrm, 50hz
Used Clinker Grinding Plant With Loesche-Vrm/Vertical Mill. Nominal Outputs
Are: - 120 To/Std Portland Cement With  3,500 Blaine-Fineness - 61.5 To/Std
Portland Cement With 5,500 Blaine-Fineness - 49

The Compacting Plant Was Used For Grinding And Briquetting Slag Into
Briquettes For Further Processing Use. Major Equipment Includes: -Stacker
(200 T/H For Semi-Circular Stockpile Of 100,000 T Of Bla
Used Kaolin, Carbonate. Lime Processing Plant Equipment. Includes Raymond
Roller Mill Model 5057 Rated 2 Tph, Belt Conveyors, Roll Crusher Rated 2
Tph, Rotary Kiln Dryer 2 Tph, Dust Collector With Blo

Used 168 M3 Per Day Autoclaved Aerated Concrete (Aac) Plant By Henan
Bochuang Machinery Equipment Manufacture Co. Ltd. Reportedly Possible To
Increase Capacity To 500 M3 Per Day. Uses The Following

Used Concrete Blocks Plant Made By Besser In 1998 And Shutdown In
December 2013. Reportedly In Excellent Condition And With Approximate
Capacity Of 1500 Blocks Per Hour. Line Includes The Following Eq

Used Hansa Aac Autoclaved Aerated Concrete Plant With Approximate
Capacity Of 100,000 M3/Yr. Plant Reportedly Built 2006-2007 And Operated
Between 2007 And 2013. - Uses: Sand, Hydrated Lime, Portland

Used line for mixing and packaging powders. Line had been running on
building materials (cement). Line consint of: - plougshare mixer by WAM model
WBH1100 with total volume 1100 l and working volume

Used 400 Tons/Hr Fabremasa Mzf-5 Cement Mixing Plant. Manufactured In
2002, New Controls Reportedly Installed In 2009. Includes (3) Hoppers Each
With 15,000 Kg Capacity And Twin Horizontal Axis Mixer

Used 450 Tonnes / 8 Hours Brickworks. Plant Reported To Have Started
Production In 2008 And To Have Shutdown In 2011. Oven Has Dimensions Of
80m Length, 4.6m Width, 2m Height. Drier Has Length 80m,

Used Cast Tile Production Line, Capacity 5 Tons/Days Decorative Slurry,
Including Ball Mill, Rotary Kiln, Ceramic Drying Line, Three Sanding Machine
(Denk, Desoutte, Drost), Slurry Preparation Line,


Chemical Used Plants
Chlorine and Caustic Soda Plant- 181,200 tons of caustic soda per year. Unused
and never installed membrane electrolysis chlorine and caustic soda plant.
Used PTA (terephtalic acid) plant with capacities of 120,000 tons per annum of
pta (terephtalic acid) and 121,000 tons per annum of cta (crude terephtalic acid).

Used 350 metric ton per day methanol plant. Start up was in 1997, shut down in
2007

Higher Amines - 24,000 MTPY- This unit is part of an integrated facility that
sits on 57 acres of land, two-thirds of which are undeveloped.  The facility
produces Methyl Amines for use in Higher Amines and Amine Derivatives.
Caprolactam Plant-60,000 MTPY-
This Caprolactam Facility includes all intermediate and byproduct plants.  The
facility starts with benzene and finishes with caprolactam and ammonium
sulfate byproduct:

Methanol Plant - 350 TPD- Capacity: 350 mt/day of methanol using syngas as
the raw material. Start Up: 1997
MTBE / TAME Plant - 3,500 BPSD- Plant produces methyl tertiary-butyl ether
(MTBE) from Isobutene and Methanol.  Plant will process approx. 20,000
BPSD of a C4 hydrocarbon stream to produce 3,500 BPSD of MTBE


Construction Machinery
KOMATSU PC130-8, Tractor shovel, YEAR 2009, HOURS 5500
KOMATSU PW160-7, Tractor shovel, YEAR 2008, HOURS 8000
1 Piece used tracked excavator Make Caterpillar. Model 336DL, YOC:
2009Hours: 9.412
1 Piece used tracked excavator, Caterpillar. 336 D LN, 2009, 7.897Hrs
1 Piece used Impact crusher – mobile- Manufacturer: Kleemann, Type: MR 100
ZS, Year: 2007, Hours: 8.352
1 Piece used Double drum roller Manufacturer: Hamm,  Type: HD 14 VV,  
Year: 2009, Hours: 707,         
Asphalt Paver, DYNAPAC - SD2500 C x 2, 2011        
Dozer, Caterpillar - D6n Lgp, 2009        
Excavator On Tracks Caterpillar - 320d Ln, 2010        25300 Kg        
Excavator On Tracks Caterpillar - 329e L, 2010,         29520 Kg
Excavator On Wheels Caterpillar - M316 D W Blade, 2011, 17150 Kg,
Material Handler Liebherr - A944c-Hd, 2009, 60000 Kg
3 Nos- Vibrating Roller Dynapac - CC224 Hf, 2011, 7000 kg        
Vibrating Roller Dynapac - Cc424 Hf, 2011, 11240 Kg        

DOOSAN DX190W, YEAR 2009, 7500 HOURS

Kettenbagger / Tracked excavator  CAT 319 DL, Built / year:011Std./h:2882
Wheel Loaders / Wheeled loader CAT 906 new H2 Built / year: 2014 Std./h: 1
Wheel Loaders / Wheeled loader Wacker Neuson WL 18 Built / year: 2013 Std.
/h: 279
Wheel Loaders / Wheeled loader Wacker Neuson WL 50 Built / year: 2013, Std.
/h: 349
Mini excavator / mini excavator Komatsu PC 20 MR-2 Built / year: 2007 Std./h:
3472
Mini excavator / mini excavator Komatsu PC 50 MR-2 Built / year: 2007, Std.
/h: 3049
Mini excavator / mini excavator Kubota K 008-3, Built / year: 2007 Std./h: 1232
Mini excavator / mini excavator Kubota KX 36-3 Built / year: 2007, Std./h:2867
Mini excavator / mini excavator Kubota KX 41-3 S, Built / year: 2006, Std./h:
1823
Mini excavator / mini excavator Kubota KX 41-3 S Built / year: 2007, Std./h:
2779
Mini excavator / mini excavator Kubota U 25-3 Built / year: 2007
Mini excavator / mini excavator Neuson 1404 Built / year: 2014, Std./h: 1
Mini excavator / mini excavator Neuson 2404, Built / year: 2012, Std./h: 795
Mini excavator / mini excavator Neuson 38Z3 RD VDS, Built / year: 2011 Std./h:
1292
Mini excavator / mini excavator Neuson 803, Built / year: 2015, Std./h: 1
Dumper / Dumper  Wacker Neuson TD 09, Built / year: 2011, Std./h: 193
Chassis / Chassis Mitsubishi Fuso Canter 6C18 4x4 Euro6, Built / year:2015,
Km: -
Chassis / Chassis Mitsubishi Fuso Canter 7C15 Euro6 Built / year: 2015 km:
Chassis / Chassis Mitsubishi Fuso Canter 9C18 Euro6 Built / year: 2015


CNC Machine Tools
BRIDGEPORT, Model VMC301, Fanuc 21i CNC Control, 36" x 14" Table,
X=30",Y=16", Z=20", 40 Taper, 7500 rpm, 22 Station Tool Changer, New 2001

MORI SEIKI, Mori MSC-501,    (Fanuc 18iTA CNC), Upper and Lower
Turrets, Sub-Spindle, Live Tooling, 8" Chuck, Collet Chuck, 20" Swing, 2.5"
Bar Cap.
Part Catcher, New 2003

MAZAK,   Model Multiplex 610,   Mazatrol T-32-6 CNC Control,   Dual
Opposed Spindles,   Dual Turrets,   Live Tooling in Both Turrets,   C-Axis in
Both Spindles,   Spindles Move Together to Pass Parts,   6.6" Max Turning
Diameter,   40" Between Spindles,   Collet Chucks with 1.65" Capacity,   15 HP
5000 rpm Spindles,   Rebuilt Spindles.  Excellent Condition
Nakamura 8-Axis, Twin Turret, Twin Spindle, Live Tool, Y-Axis, CNC Lathe
NAKAMURA TOME,  Model WT-300 MMYS,  Fanuc 18iTB CNC Control,  
Twin Turrets,  Twin Spindles,  Live Tooling, Y-Axis,  C-Axis in Both Spindles,  
2.5" Bar Capacity,  10.6" Max Turning,  31" Between Spindles,  20 HP each,
4500 rpm,  LNS S3 Barfeeder,  New 2005,   Excellent Condition !
2-Pallet Hardinge CNC CNC Vertical Machining Center with Fanuc Control
HARDINGE,    Model VMC-600,    Fanuc OM-D CNC,    X=24", Y=16",
Z=20",    (2) 24" x 12" Pallets,    Automatic Pallet Shuttle,    8000 rpm, 15 HP,
Cat-40 Spindle,    20 Station Tool Changer,    New 1999,   Under Power and
Ready for Demo

MAZAK INTEGREX e-1060V8ii 5-Axis Combo Vertical/Horizontal Machining
Center and CNC Vertical Turning Center  Mazatrol Matrix CNC, (2) 39"
Pallets, 49.2" Swing, X=73", Y=41", Z=42",  Multi Function 5-Axis Milling and
Turning Capacity, 80 Station Tool Changer, 50 HP Milling Spindle, 50 HP
Turning Spindle,  New 2009, Only 500 Hours.  $ 799,500.

CINCINNATI  HAWK2 300 CNC Turning Center   Siemens Acramatic 2100
CNC Control,  12" 3-Jaw Power Chuck,  28" Swing over Bed, 16.6" Max
Turning Diameter, 40" Max Turning Length, Programmable Tailstock,   New
2002.

FADAL VMC 4020HT CNC Vertical Machining Center, Fadal MP32 Multi-
Processor CNC Control,  48" x 20" Table,  X=40", Y=20", Z=20", 7500 RPM,  
21 Station Tool Changer,   New 2007,.

5-Axis Mazak Milling Turning Combo with 40" Table
MAZAK, Model Integrex e-1060V/8ii, Matrix CNC Control, (2) 39.4" Round
Pallets, X=74", Y=42", Z=52", A=150 Deg, B=360 Deg.10,000 rpm  Milling
Spindle, 50 HP, Turning Spindle, Mazak e-Tower, 80 Station Tool Changer,
49.2" Max Turning Diameter, New 2009 Only 500 Hours. Like New Condition

Okuma Howa Twin Spindle CNC Vertical Turning Center
OKUMA HOWA, Model 2SP-V40, Fanuc 18iT CNC Control, 20" Swing, 17.7"
Max Part Length, 20-2500 RPM, A2-8 Spindle Nose, 12 Station Turrets, 28 HP
Spindle Motors, New 2005, Under Power and Ready for Demo !   

Okuma 2-Pallet High Speed CNC Vertical Machining Center
OKUMA,  Model MF-46VA,  Okuma OSP E100M CNC Control,  (2) 18" x 30"
Pallets,  Automatic Pallet Shuttle,  X=30",Y=18",Z=18",  Cat-40,  15,000 rpm,  
32 Sta, ion Tool Changer,  Renishaw Probe,  Rigid Tap,  New 2003, Excellent
Condition.    Less than 3000 Spindle Hours

Okuma MC-V4020 4-Axis Vertical Machining Center
OKUMA    Model MC-V4020,    OSP U10M CNC Control,    10" Tsudakoma
Rotary,    48" x 20" Table,    X=40",Y=20", Z=18",    Cat-40, 15,000 rpm,    
Thru Spindle Coolant,    Manual Tilt CNC Rotary,    20 Station Tool Changer,    
New 2002,     Excellent Condition !   

Nakamura 8-Axis, Twin Turret, Twin Spindle, Live Tool, Y-Axis, CNC Lathe
NAKAMURA TOME,  Model WT-300 MMYS,  Fanuc 18iTB CNC Control,  
Twin Turrets
Twin Spindles,  Live Tooling, Y-Axis,  C-Axis in Both Spindles,  2.5" Bar
Capacity
10.6" Max Turning,  31" Between Spindles,  20 HP each, 4500 rpm,  LNS S3
Barfeeder,  New 2005,   Excellent Condition !

Okuma MB-56VA  CNC Vertical Machining Center
OKUMA,   Model MB-56VA,   OSP U100M CNC Control,   51" x 22" Table,   
X=41", Y=22", Z=18",   8000 RPM, Cat-40,   32 Station Tool Changer,   4th
Axis Pre-Wire,   30 HP,  New 2003,   Under Power and Ready for Demo !   

4" Nomura Horizontal Boring Mill
NOMURA, Model HBA-110T-R3, Fanuc 16MB CNC Control, 33" Spindle
Diameter, 55" x 63" Table, X=78", Y= 60", W=55", Z (Quill)= 20", 20 - 2500
RPM, Cat-50, 30 Station Tool Changer, New 1998, Excellent Condition !
                                                               
OKUMA HOWA Millac 630H CNC Horizontal Machining Center  Fanuc 16iM
CNC, (2) 24.8" Pallets, X=40" Y=32", Z=32", Full Contouring 4th Axis Pallet
Rotation, Thru Spindle Coolant, Probes, Cat-50, 8000RPM, New 2005,


Mining Machinery
Used Coal Washing Plant With Capacity Of 200 Tons/Hour. Reported To Be
Made Circa 2006 And To Be In Maintained Condition. Plant Consists Of
Equipment For Handling, Crushing And Washing. Detailed Equip

Used Magnetite Iron Ore Beneficiation / Concentration Plant With Mining
Machinery And Equipment. Output Capacity Reported To Be 7.5 Million Tons
Per Year Of Magnetite Iron Ore Concentrates (65-68% Fe)
Used 1000 Tph Barge Unlodaer Made By Dravo Wellman In 1998 And Last
Operated In 2011. Last Used For Coal But It Can Be Used For Any River Or
Port Unloading Purpose Such As Gravel, Sand, Grain, Pellets

45 Tph Coal Drying & Briquetting Process Plant

5000 Tpd Gold Concetrator Plant
10,000 Tpd Gold Processing Plant
25 Tph Alluvial Gold Plant


Metallurgical Machinery


"Waterbury Farrel" Sendzimir 52" (1320mm), ZR-22B-52 Complete Reversing
Cold Rolling Mill,
Max. Strip Width: 1320mm, Max. Strip Inlet Thickness: 6mm, Min. Final Strip
Thickness: 0.2mm, Mill Strip Speed: 0 / 300 / 762 M/Min., Min./Max. Winder's
Tension: 2720 / 30,000 Kg, Max. Coil Weight: 24ton, Coil Diameter: OD
1950mm x ID 610mm

"Clecim / Siemens / Vai" 51" (1300mm) Combined Tension Leveling And 4-Hi
Temper Mill Line  ,
4 Hi, Temper Mill Hydraulic Pressure: 1,000 ton, Strip Width: 600 - 1300mm,
Strip Thickness: 0.2 - 1.5mm, Material Yield Point: 200 - 500 N/mm2, Material
Tension Strength: 300 - 700 N/mm sq. Max. Tension, Leveler: 150,000 N, Max.
Line Speed: 300 m/min

60" x .500" x 66,000# STAMCO HEAVY GAUGE SLITTING LINE,
w/TURRET RECOILER &  INLINE 15K AVON PACKAGING LINE,
Strip Capacity - .050"- .500"  Entry Coil OD - 35"-78" Entry ID - 20", 24" &
30"
Entry Coil Weight - 66,000# Exit Coil OD - 36"-74" Exit Coil ID - 20"-24" Exit
Coil Weight - 66,000#

60" X .135" X 30K CINCINNATI/HERR VOSS CUT TO LENGTH,
Material Thickness - .015"-.135", Coil Width - 8.430"- 60", Coil Weight - 30,000
#
Entry Coil - ID 16"- 24" /  OD - 72"

18" 2-HI ONE-WAY UNITED TEMPER MILL,
Entry/Exit Gauge - .022"-.250" Coil Width - .375"-15.43" Coil Weight - 8500#
Entry Coil - ID 16"- 24" OD - 68"

4.30" X .130" NEWMAN EDGING LINE,   Material Thickness - .014"-.130"
Coil width - .250"-4.5" Max Weight - Entry 4,000# / Exit 2,000#         Entry Coil
-  ID 16"-24" OD - 60"

4" X .125" NEWMAN OSCILLATING EDGING LINE,
Material Thickness - .014"-.130"  Coil width - .375"-4", max oscillated-1.75"
Max Weight Entry - 4,000# / Exit - 2,000# Entry ID - 16"-24" / OD - 60"
Exit Coil ID - 16" -  24" / OD – 60

1.75"X .115" NEWMAN OSCILLATING EDGING LINE,
Material Thickness - .022"-.115"Coil width - .480" - 1.75" Coil weight - 1800-
4000 Lbs
Entry ID - 16"-24" / OD - 52"Exit Coil ID - 16" -  OD - 52"

4" X .125" NEWMAN OSCILLATING           EDGING LINE,
Material Thickness - .014"-.125"Coil width - .250"-4"Coil weight - 4000-6000
Lbs
Entry ID - 16"-24" / OD - 52"Exit Coil ID - 16", 20" & 24"/ OD - 52"

27" X .059" X 12,000# PAXSON SLITTING LINE,
Material Thickness - .015"-.059"Coil Width - .375"-27"Coil Weight - 12,000#
Entry/6,500# ExitEntry Coil ID - 20"-23.5" / OD - 60"Exit Coil ID - 16"-20" /  
OD - 48"

72" X .105" X 60K DENRO TRAPAZOID CTL LINE,
Material-Cr, Electro Gal, Hot Dip Gal, P&OMaterial Thickness - .015"-.102"
Coil Width - 23.6"-72" Coil Weight - 60,000 (27,200 Kg)
Entry Coil ID - 20"-24" / OD - 32"- 87


"PRODUCTION MACHINERY" SLITTING LINE
52" x .20" (1320mm x 5mm), Coil Weight: 24TonsCoil Width: 52" (1320mm)
Coil Diameter: ID/OD: 24" x 76.77" (610 - 1950mm)Min. Cut Strip Width:
25mm (1")
Line Speed: 150mpm Max

"PRODUCTION MACHINERY" SLITTING LINE WITH STRAPPING
LINE 52" X .120"
(1320mm x 3mm), Coil Weight: 24 tonMax. Strip Width: 52" (1320mm)
Max. Strip Thickness: .120" (3mm)Line Speed: 200mpm Max
Line Direction: Right to Left, "Z" configuration

"SCHLEICHER" COMBINED CUT TO LENGTH & SLITTING LINE
41.33" x .08" (1050mm x 2mm),
Material: (CRS) For Drum Strip Production (920 width x 1650mm length)
Coil Weight: 6 tonStrip Width: Max. 1050mmStrip Thickness: Max. 2.0mm
Exit Strip length: Max. 3000mm

"PRODUCTION MACHINERY" CUT TO LENGTH LINE 52" x .12"
(1320mm x 3mm),
Coil weight: 24tonsLine Direction: Left to RightCoil ID/OD: 610mm/1500mm
Line Speed: 60mpm Material Max. Thickness: 3mm
Material Max. Width: 1320mm

"WATERBURY FARREL" 4 HI TEMPER MILL 10"x20"x30" (256mm x
508mm x 762mm),
Work Roll Driven Direction: Left to Right Coil Weight: 12Ton Coil OD/ID:
610mm x 1250mm (24" x 50") Max. Material Width: 650mm (26")
Nominal Reduction: 3 - 5 percent Material Thickness: Entry 4mm Max, Exit .
8mm Min

"ANDRITZ-RUTHNER / FATA-HUNTER- PRODUCTION MACHINERY"
PICKLE LINE 52" (1320mm),
Coil Weight: 24ton Coil Internal Diameter (ID): 610 - 760mm
Strip Width x Thickness: Max. 1320mm x 5mm Entry and Exit Strip Speed:
Max. 53m/min. Process Section Strip Speed: Max. 35m/min. Line Capacity:
140,000 T/A
Coil Exit: ID 610mm - OD 1950mm

"PRODUCTION MACHINERY" COIL STRAPPING LINE 52" (1320mm)   
Max Coil O.D.- 2000mm "L" Type Coil Car (2) Arm Turnstile
Tilt Table, Strapping & Exit Tilting Tables Power Roller Conveyor
Exit Coil Transfer, Lazy Susan Style

Modern Copper Rod and Tube Plant In Mexico
A complete modern plant to manufacture copper and oxygen-free copper rod
and tube using state of the art upcasting technology, rolling and drawing.
Copper Rod/Wire - 5,000 Metric Tons Plus B. Copper Tube - 4,500 Metric Tons
Total Power: 360 Kw Diameter Of Rod: 20mm Coiling Weight: 1.5 ~ 2 T.
Density Of Rod: 8.9 Kg/Dm3


60" x .250" x 30,000# Forte Slitting Line
Currently Installed In Plant and Operating Under Power,  Thickness Range:  .
0290" - .250"
1600mm x 4mm x 55,000lbs Voest Alpine Multiblanking Line
Year: 2004 Material: Cold Rolled, Galvanized, Prepainted. Thickness Range: 0.5
mm - 4mm
Slitting Mode Line Speed:  90mpm Thickness 0.5 - 1.25mm 75mpm Thickness
1.25 to 4mm
Installed and in Operation

3" COLD STRIP ROLLING PACKAGE
Featuring: 13" ZR33-13 Sendzimir Mill and 14" Waterbury Farrel 2 Hi Skin
Pass Mill
Both are currently installed in plant & are under power.
These machines can be purchased as a package or individually.

13" Sendzimir ZR33-13 Cold Reversing Rolling Mill
Width: 13 5/8" Thickness: .010" - .187"  Model ZR33-13 Thickness Range: .
187" - .010" Carbon & Stainless Finish Ga. Line Speed: 400 FPM - 600 FPM
Max Coil Width: 13-5/8"

60" x 40,000# Stamco Dual Head Loop Slitting Line
Width: 20" - 60" Thickness: .010" - .134" Capacity: 40,000 lbs Direction: Left
to Right
Manufacturer: Stamco Material: CR, Galvanized, Aluminum, Stainless
Coil ID Range: 16" - 24" Entry & Exit Coil OD: 72" Line Speed: 400 or 800
FPM

60" x 6mm x 55,000# Bonak Slitting Line
Thickness Range: 0.5mm - 6mm Line Direction: Left to Right Speed: 150 MPM

60" x .187" x 30,000# Loopco Slitting Line
Width: 1,500mm Thickness: 6mm Year: 2007

60" x 7" x 40,000# McKay/Cincinnati Slitting Line
Width: 60" Thickness:Capacity: 40,000 lbs Direction: Right to Left
Manufacturer: McKay/Cincinnati

140mm x 7mm Forever Pipe Mill Line, NEW 2011
Tube Diameter: 3" (76mm) - 6" (152mm) Wall Thickness: .040" (1mm) - .275"
(7mm)
D/T Ratio: 10:1 - 60:1 Spindle Diameter: 4-3/4" (120mm)

2080mm x 15mm x 30 Ton Fimi Cut-to-Length Line
Band Thickness: 3mm - 15mm Maximum Coil Weight: 30 Tons Stacking
Weight: Max. 3,000 kg/m
Length Stacking Height: Max. 400mm Material Thickness: 3mm - 8mm up to 30
m/min.
Material Thickness: 8.1mm - 15mm up to 22 m/min.

2000mm x 12 mm x 40 Ton Elios Flying Shear CTL Line
Thickness: 1mm - 12mm Coil Weight: 80,000 lb Width: 2,000mm Line
Direction: Left to Right
Line is presently Installed

72" x .313" x 90,000# Red Bud/Bradbury CTL NEW 2014
Brand New Red Bud Cut-To-Length Line (NEW IN 2014)

72" x .105" x 20,000Lbs Dahlstrom CTL Line
Thickness Range: .015" - .105" Coil Weight: 20,000 lbs Make: Dahlstrom
Industries
Coil Width: 24" - 72" Coil ID: 16" - 24" Coil OD: 72" Speed: 210 feet per
minute Direction: Right to Left

72" x 40,000# Red Bud Cut to Length Line
Coil Capacity: 40,000 lbs Width: 72"

1560mm x 16mm Hitachi Cut-to-Length Line w/ Flying Shear
Coil Thickness Range: 4.5mm - 16mm Coil Weight: 30,000 Kg Coil Width:
900mm - 1,560mm
Coil ID: 508mm, 610mm, 762mm Coil OD: 1,000mm - 2,200mm Line Speed:
Max 30 MPM
Line Direction: Right to Left Maker: Hitachi, Japan

60" x .105" x 20,000# Dahlstrom Cut-To-Length Line
Thickness Range:  .016" - .105" Line Speed:  210FPM Sheet Length:  12" - 144"

60" x .075" x 30,000# Emag/Voss Cut-to-Length Line
Thickness Range: .018" to .075" Speed: 30 to 180 FPM

660mm x 22mm API Pipe Mill NEW IN 2011
Pipe OD:  273mm - 660mm Wall Thickness:  5mm - 22mm  
Modern Design FFX Technology
OpenTechnical Standards: API 5L, API 5CT, GB/T 3091, JIS G3452, JIS
G3444, JIS G3445, ASTM A513, EN 10219
Steel Grade: A, B, X42, X46, X52, X56, X60, X65, X70, X80
Petroleum Casing Pipe: H40, J55, K55, N80
Structural Pipe: Q215, Q235, Q345 Steel Grade Max: J55, K55, X80

406mm x 12.7mm Wean Damiron API Pipe Mill Line
Year 1980
Pipe OD:  406mm - 101.6mm Wall Thickness: 12.7mm - 3mm
Max Pipe Length:  14M Line Speed:  50 - 15 Meters/Min
Material:  X52 - X70  Q235, Q345

177mm Abbey Etna 6KU API Tube Mill
Abbey Etna 6KU API

140mm x 7mm Forever Pipe Mill Line, NEW 2011
Tube Diameter: 3" (76mm) - 6" (152mm) Wall Thickness: .040" (1mm) - .275"
(7mm)
D/T Ratio: 10:1 - 60:1 Spindle Diameter: 4-3/4" (120mm)  
Condition: Excellent, Running

3" x .125" Abbey Etna 2KU Tube Mill Line


Paper and Pulp Machinery

Printing and Writing Paper Machines
Used 160" (4.10m) Paper Machine Consisting Of Voith-Valley 160" Pond Width
Headbox, Stainless Steel Contacts, 167" Wire Width; Cantilevered Fourdrinier
3-Blade Forming Board; Beloit Suction Press;

226" (5750mm) Wide, 214" (5.45m) Trim, Beloit Walmsley, Fourdrinier Paper
Machine. New In The 1980s Manufacture With Various Upgrades In Recent
Years. Design Speed 600 M/Min

Used 252" (6.40m) Liner Paper Machine, Fully Rebuilt And Upgreaded By
Gl&V In 2004. Stainless Steel, Pressurized Headbox And Fourdrinier Table

Used 272" (7m) Valmet Paper Machine. 400 Tpd Capacity, 5500 Fpm. 282"
Wire Width. (41) Dryers; (6) Dryer Sections 75 Psi. (3) Press Sections; 1st
Section Pickup Press 390 Pli;

3700MM, 35 - 110 GSM, 190 TPD MAX  MIXT. 130 TPD Escher Wyss
Fourdrinier wire paper machine with dandy roll and yankee Cylinder,  1980-
2006

Voith, Complete 3650 m trim paper machine line for Printing & writing grades
50-220 GSM, 1988- Rebuilt 2006

4700 mm 30-230GSM, 325TPD Beloit Paper Machine for writing/printing
papers Installed in 1959 rebuilt in  1980 and 1994  


Used VALMET 3700 mm Paper Machine Trimmed width: 3700 mm Weight
range: 45 -130TPD, 1992, 1995, 2011...

Escher Wyss 3650 mm Complete Paper Machine Max production capacity: 330
Tpd 1980- 2010

Walmsey , Beloit, 5600 mm Paper Machine Deckle width at pope reel: 5600 mm
rebuilt 1997& 2009, 46-  120GSM  
Beloit Printing & Writing PM, 2.300 mm, 50-150 gsm, 160 TPD - YOM 1992.
Rebuilt 2005,

Used Voith 3,000mm Printing, writing & brown Paper Machine Speed
650m/min  50-170 GSM, 38000TPY, 1980, Rebuilt 2007...

Used 2.75m (125”) Wide. 2.50m (100”) Trim Paper Machine By Escher Wyss
Overhauled By Spi. Producing Mg Papers, Completely Overhauled In 2004.
Producing 15 To 40 Gsm Basis Weight Grades At A Maximum De

Coated paper
4000 mm 54- 170 GSM, 400TPD, Voith/Andritz Coated Paper Machine
Manufacturer: Wartsila, Voith  1980, 1992 and 2005

Used Valmet 8530 mm 740 TPD Twin Wire Newsprint Paper Machine  35.8-
52GSM, 1980, rebuilt 2006

News Print
Used Newsprint Machine. 184,000 Tons Annual Capacity. 45-52 G/Square
Meter Basis Weight Range. 1060m Per Minute. 8.4m Trim Width. Forming
Section Is Hydraulic Sym-Flo Headbox With Valmet Sym-Former An


Used 101" (2.59m) Width, 45 T/D Cylinder Type Paper Machine Making
Chipboard At 150-400 Gsm. New In 1985. Operation Speed: 300m/Minute,
Maximum 350 Meters/Minute, Basis Weight: 150-400 Gsm

Board, Ktafr, Flute and Liner Papers
Used 102" (2590mm) Width Duplex Card Board & Liner Board Paper
Machine, 60 Mtpd Production Capacity, Cylinder Type Yankee & Multy Dryer
Paper Machine, 70 Mpm Speed, 150 - 400 Gsm, Dryer Face 2590mm, T

Used 112" (2.6m) Trim, Fourdrinier Paper Machine Making Corrugated
Medium At 90-125 Gsm. New In 1987 And Stopped In March Of 2004.
Operation Speed: 200m/Minute, Maximum 220m/Minute, Basis Weight: 60-1

Used Emua, 2.65m Wide, 2.47 Trim Paper Machine For Kraft Liner Grades
With An Emua Pressurized Headbox An A Brass 2.45m Wide Suction Couch
Roll Couch, At 600mm Diameter And A 125kw Electric Dc Motor.

Used 180 Tpd Liner Board Machine. 120" Face, (9) Cylinders, Kadant Octopus
Radial Distributor, (80) Dryer Cans. Former To Reel. Very Good Condition.
Can Be Run In Place. Stock Prep Is Also Available.


Used 122" (3.1m) Wide, 112" (2.85m) Trim, Fourdrinier Paper Machine Of
Japanese/Taiwanese Manufacture. Designed For 160-450 Gsm Grades At 230-
300 Tons Per Day Operation. New In 1984.

Used 135” (3.45m), 129” (3.30m) Trim Bruderhaus Paper Machine 600 M/Min,
Production 150 Tpd, For Coated Grades, Specializing In Technical Papers, At
70–120 Gr/M2. Fully Overhauled By Voith Dorries


Used 139" (3.5m) Wide Carcano Paper Machine: New In 1959 For Glazed
Grades And Foodstuffs Paper Grades. Basis Weights Range Of 35 -130 Gr/M2
With A Maximum Speed Of 320 M/Min (1029 Fpm).

Used 144' (3.6m) Wide, 78" (2.0m) Trim Paper Machine For The Production Of
Various Printing Paper, Copy Paper And Fruit (Wrapping) Paper Grades In
The 40 To 80 Gsm Range.

55 - 200 GSM, 180 Voith Fourdrinier wire paper machine with top former and
yankee cylinder, TPD
2380mm Cylinder Mould Paper Machine for packaging and/ or board
paperpackaging 120-170 Gsm/ Board 170-550 Gsm, 50 Tpd/ 70 Tpd


1 Voith Pm Fluting/Liner, 2400 Mm, 100-180 Gsm, 120 Tpd
Complete Voith 2400 Mm, 120 Tpd Voith Fluting/Liner Machine, 1986- 2008,

Tissue Machines
Used Beloit 92" Trim Yankee Fourdrinier Tissue Machine, 50 Tpd, Machine
Speed 3700 Fpm (Yankee), 3300 Fpm (Reel), Reel Basis Weight 10.6 Lbs Per
3000 Sq.Ft., Crepe Ratio 18%, Ge Dc 2000 Drives, Foxbor


Used 94" (2.45m) Tissue/Towel 70 Mtd 2-Ply Consisting Of The Following
Equipment: Stock Prep: 1 25-30m3 Pulper With Conveying System 6 25 M3
Stock Stainless Steel Stock Tanks With Agitator 1 Thic

Used 2.464mm Wide Beloit (Stevensformer) Crepe Paper Machine. Trim 2.345
mm. For Basis Weight Grades Between 25-80 Gsm. Machine Speed 200-400
M/Minute, And A Production Capacity Of Roughly 40 Tpd.

Used 100" (2.5m) Tissue Machine Manufactured By Overmeccanica In 1983
With Upgrades In 1993. Capacity: 70 Tpd Grammage: 14-28 G/M2 Design
Speed: 1400 M/Min Type: C-Wrap Twin Wire Press Section: - Su

Used 106" (2.7m) Tissue Machine Still Running W/ Inclined Wire. Maxmimum
Speed 900 M/Min, Tissue Paper From 15-40 Gsm. Machine Includes: Vertical
Toschi Etc2 Screen, Fan Pump, Conventional Pulper, Hea

Rebuilt 106" (27m) Wide Tissue Machine. For Tissue And Towell Grades Using
Recycled Stock. Does Not Include Stock Prep. Scope Of Supply Includes The
Delivery Of A Fully Reconditioned (To New Condition

Used 108" (2.75m) Pmt Italia Tissue Machine - Installed New In 2004 -
Capacity: 80-100 Tpd - Crescent Former Machine With Twin Jet Headbox
Stainless Steel Crescent Former,

Voith 2230 mm 30 TPD Tissue Paper Machine

OverMeccanica Twin-Wire C-Wrap Tissue paper machine, 2550 mm at reel, 14-
28 gsm, 60TPD, 1983, rebuilt  2004, 2011

2770 mm Yankee Fourdrinier Type Tissue Paper Machine Year of construction
2003, 17-40GSM,

Used CELLI Gino  15 TPD 1850mm tissue paper machine, Rebuilt 2008,
stopped in 2014
2700 mm Over Meccanica paper Machine for Tissue and MG Papers 2003,
Tissue 15 Gsm, MG papers 30-90 GSM  

Used OverMeccanica 2800 mm MG Tissue paper machine, 20-90GSM, 40-
60TPD  


Pulp Mills
1 Andritz, Sunds Complete Ecf Pulp Mill, 385.000 Tons/Year

1 Sandy Hill Feltless Pulp Machine, 96'', 200 Tpd, Brand: Sandy Hill Sandy Hill
Feltless Pulp Machine: Working Width 96",

1 Metso Semi- Chemical Pulp Line, 500 Tpd 1980-2004

1 Andritz, Voith Mechanical Pulp Linen, Just Stopped Aug. 2014, 30.000 Tpy

Petroleum Sector Machinery

USED OIL REFINERY. 30,000 BARRELS PER DAY. CRUDE VACUUM
UNIT 30,000 BPD. C5/C6 PENEX UNIT 3150 BPD. NAPTHA
HYDROTREATER UNIT 11,300 BPD. PLATFORMER UNIT 8220 BPD.
FLUID CAT CRACKING UNIT 11,500 BPD. D


90,000 BPD Refinery Compelete with Topping 1, Topping 2, ISO 1, ISO 2 ,
Ipsorb Unit, CCR Reforming Unit, Ultraformer 2, Distillate Ultrafiner Unit,
Kero Ultrafiner,Gasoil Hydrodesulphurization Unit, Dewaxing Unit,
Visbreaking Unit, Selective Hydrogenation Unit, LPG Merox, Light Cracked
Naphtha MEROX, Sulphur Recovery Unit 1, Sulphur Recovery Unit 2

90,000 BPD Refinery with 2x 3000kva, 1x 3150KVA and 1x 3750KVa
Generators

Refinery - Crude Oil -180,000 BPD,  Combined Capacity: 220,000 BPD,
Feedstocks: Crude, Gasoil and Residual
Shut Down: June 2012 witjh Continuous Catalytic Reformer , De-Hexanizer,
Penex/Molex Unit, Selective Hydrodesulphurization Unit, Selective
Hydrogenation Unit, HF Alkylation, ULSD Hydrotreater, Sulphur Recovery
Unit, Gas Turbine Generation Unit & Heat Recovery Steam Generator

(2) Sulfur Recovery Units Available Separately from a 3,000 Metric Ton/Day
Clean Syngas Refinery Gasification Plant

2,300 BPD Hydrotreater Unit rated for 730 gpm of hydrocarbon feed and 1,722
SCFM of hydrogen feed.from complete Poly-Isobutylene (PIB) Plant

C4 / C5 Fractionator Unit 850,000 metric tons/year of from complete Poly-
Isobutylene (PIB) Plant-
Acid Gas Removal Unit Available Separately from a 3,000 Metric Ton/Day
Clean Syngas Refinery Gasification Plant

Diesel Hydrodesulfurizer (HDS)-28,800 BBL/Day
Built by F.W.I., with an original capacity of 11,000 Bbl/d, upgraded to 18,500
Bbl/d in 1986. Scope of the unit is the catalytic desulfurization of gas oils for
diesel and heating gasoil production. Revamped in July 1986

LNG Peak Shaving Plant-2,400 Nm3/hr Nat’l Gas (4m3/hr of LNG) Latest
Modification 2004-2008
Butadiene Plant - 90,000 TPY(min 99.6 % purity) Major Upgrades: 1984

Isobutylene Plant-125,000 TPY Plant was constructed in 1981

PIB (w/MTBE) Plant - 112,000 MTPY This PIB facility's manufacturing
process produces 112,000 mt/yr of Poly-Isobutylene (PIB) using Amoco
technology with aluminum chloride catalyst.  A feed hydrotreating facility was
added in 1992
Toulene Recovery System -18 mt/hr This all stainless steel, dual-column
distillation system was designed by Sabic to separate and purify up to 18 mt/hr
of toluene from a complex mixture including isomers, Bisphenol-A, and water

Polymer UMC
Used 36000 Mt/Year Acrylic Fiber Plant Consisting Of (3) Lines: - Line 1 Was
Made In 2006, Shut Down In June 2014 And Has Capacity 18,000 Mt/Year.
Installed With Japanese Technology. - Lines 2 & 3 We

HDPE Plant-170,000 TPY(approx. 19 tons/hour) Process: Mitsui Start Up: 1990
Products: High Density Polyethylene (Bimodal & Unimodal)

Polyethylene Plant (LLDPE) - 140,000 TPY Year Built:   1999 , Shut Down:   
2008, This facility is in excellent condition. This plant includes:• A separate
catalyst plant,
        LDPE Plant-50,000 TPY Consisting of (2) Plants (LDPE I and LDPE II)
        Built with a design capacity of 50,000 TPY.
        Single Line capacity 5,000 - 6,000 kg/h
        Capacity can be increased - depending on product mix

Polyester Resins (PET)-600,000 TPY Bottle Grade, Fiber Grade and
Amorphous PET Production with 700 ton/day Polymer In (3) Lines Expandable

Polyester Fiber-High Tenacity-6,500 MTPYSelf-contained fiber production
facility with one step capability serving Geotextile and Coated Fibres & Fabrics
markets and Automotive safety applications, • 4 spin-draw lines with combined
capacity up to 6,500 tons

Unused Polyester Fiber Plant Capacity 50.000 Metric Tons Per Year Of Staples
And Cords. Continuous Process. Still In Crates.

PET Plant-150,000 TPY Production Sites "Site 1"- 1991 production PET
Commodities
and "Site 2"- 1995 production Polyester Specialties (textile, film, packaging

(2) Used Lines For Additional Polycondensation Of Bottle Grade Pet Resin,
Which Can Then Be Used For Production Of Popular Pet Bottles For
Beverages. The Lines Were Started Up In 1995 And 1997. Capaci

Used PP Cable Fibers (Wicker Cord) Plant Rated Nominal 150-200 Kg/Hour Of
Final Production. Continuos Process Consisting Of Extrusion Of Pp Granuls
And Twine Of Fibers. Main Equipment: Extruder With F


Polypropylene-225,000 TPY- The polymerization plant (PPU) has a capacity of
225,000 tons per year and is a Unipol technology plant, with two gas phase
reactors, so can produce homopolymers, random copolymers and impact
copolymers.


PVC Suspension - 220,000 MTPY  with  State Of The Art Process Foresees
"Close Lid Technology"

Suspension Polyvinyl Chloride (S-PVC) Plant - 170,000 MTPY
Emulsion Polyvinyl Chloride (EPVC)- 75,000 MTPY This production plant for
emulsion polyvinyl chloride (EPVC) products was started up in year 1988 and
was kept continuously updated with several improvements during years.
Initial technology was supplied by Enichem,

PVC Plant - 150,000 MTPY Commissioned: February 2001, Shut Down:
January 2013 with the 4000,000 MTPY VCM Plant

Used Approximately 8 Ton Per Hour Pvc Pellet Plant. Main Items Included In
The Plant: (1) Gas Fired Rotary Dryer Which Measures Approximately 3,800
mm Diameter X 20,000mm Long. (3) Cpm Model 7936-12 Pe



Used Cyanoacrylate Adhesive Plant With Capacity Of 500kg Crude Monomer
Per Batch. Batch Time Is Approximately 18 Hours. Plant Is Japanese Made
And Was New In 1985. Requires: Ethyl Cyanocetate And Para

Unused Nonwoven Synthetic Material (Spanbond) Production Plant Rated
22,000 Tons Per Year. Raw Material Is Pp. The Plant Can Produce Not Only
Geotextile, But Synthetic Carpet Base, Laminated Packing M


Unused 1518 Tpy Polymer Color Concentrate Plant. Produces Different Colors
And Names Of Dyes For Polyethylenes And Polyolefins. Batch Type Process.
Still In Crates.


Recycling and Other Lines

(3) Plastic Recycle Systems Available for Materials: PET, PS, LDPE, LLDPE,
HDPE, PP, Other Polymers and Feedstock Forms: Flake, Regrind, Shredded
Film, Densified Forms Process

Plastic foil (mainly Low-Density Polyethylene, LDPE) recycling line, Italian
made, new 2003, including the following: feeding conveyor, shredder, feeding
auger, washer, cleaning system, mechanical (c


Plastic materials recycling plant. The plant includes the following: - PET bottles
recycling line, capacity 0.5 tph, producing PET flakes, shredder made in Spain,
rest of the line Chinese made; -


Used Tire (Tyre) Recycling Line Reportedly Made In 2009 And Run For Less
Than 1 Year. The Line Conists Of The Following Equipment: - Top 1500
Granulator - Mak Tb1800 Roll Mill (Diameter 512 Mm, Length


Used 0.5 tph PET bottles recycling line. Shredder made in Spain, rest of the line
Chinese made. Line in good conditions, reported new in 2009. Include: a
feeding conveyor; pre-washing machinery, sort


Used 1 tph PET bottles recycling line, made by AMIS-ZERMA (Germany), new
2003, reported to be in very good condition. Include: 2 Feeding Conveyors with
metal free zone; Metal Detector bridge moun


R-PET extrusion machines,  In-Line: 170 kg/hr, 250 kg/hr, 500 kg/hr and Off-
Line500 kg/hr, 800 kg/hr, 1000kg/hr. with Up-stream deCOM, Dryers and
Crystallisers etc.
Some Sheet Dimensions.
Thickness; 200-1000 microns for PET, Customers Material Widths 950mm,
850mm, 730mm.

Werner & Pfleiderer ZSK 250 Twin Screw Extruder and Pellet Line
Previous Used in Production of Polypropylene - 250 mm Werner Pfleiderer twin
screw


Textile Plants  and Yarn Lines

1 Saurer, Allma Saurer Alma Hamel Plant For Filament Complet Plant
1 Volkmann, Trützschler, Zinser Complete Spinning Plant- Before 1990,2000
1 Rieter Complete Open End Spinning Plant
Used Open End Spinning Plant Drawing Frame 2 Ingolstadt, Rsb-51, Y 1987,
2000
1 Cognetex, Zinser Complete Worsted Spinning Plant1993, 2000, 2004
Fadis, Attucci Chenille Machine Plant, Chenille Machine Plant1997, 2008
Volkmann Complete PP BCFYarn Manufacturing Plant1996 2004
1 Trützschler, Zinser Complete Ring Spinning Mill, 15840 Spindles2003, 2012
Carding, Blowroom, Ring Spinning, Luwa, Zinser, Saurer, Schlafhorst,
Trützschler, Murata, Rieter Full Factory1988, 1999, 2006, 2010, 2011, 2012
1 Zinser, Nsc Schlumberger Yarn Spinning Plant, Wool : 1997 2000
1 Saurer Complete Twisting Plant1996, 1999, 2001
1 Marzoli Complete Cotton Spinning Plant 8.064 Spindles1990, 1995, 1999, 2000
1 Woolen Spinning Complete Wool And Acrylic Before 1980
1 Trützschler Yarn Spinning Plant Truetzschler Blendomat Bo-A 2300 1
Automatic Bale Opener- Y 2006 To2008
1 Giesse, Temat Chenille Plant 1997
1 Guill Nsc Gc13, Ca , , 1989, 2001
1 Rieter Complete Open End Spinning Plant1993, 1999, 2000, 2001, 2002
2 Galvanin Complete Mill For Sewing Threads1989, 1996, 2004, 2007,
1 Rieter Complete Oe Spinning Mill1987, 1999, 2001
1 Schlafhorst, Zinser, Nsc Schlumberger Complete Worsted Spinning Line1987,
1989, 1994, 1995, 2001.
1 Rieter Complete Open End Spinning Mill1987, 1999, 2001
Rieter, Trützschler, Zinser Spinning Mill For Sale1986, 2002
1 Trützschler, Schlafhorst Open End Plant 1996, 2000, 2001
1 Nsc Schlumberger Worsted Spinning Plant 6,624 Spindles1981 1992, 2000
1 Trützschler, Zinser Complete Plant For Ring And Openend Yarn
Production1998
2000
1 Rieter Complete Yarn Unit2005
1 Worsted Spinning Spinning Worsted Plant 1983, 1984. 1997, 1999, 2002, 2003
Schlafhorst Autocoro 360 Se12 Open End Spinning Plant (864 Spindles) 2005
1 Rieter Complete Ring Lakshmi Rieter Ring Spinning Plant1996,
1997, 2001
1 Rieter, Murata Complete Ring Spinning Plant1998, 1999, 2000, 2006
1 Rieter Complete Ring Spinning Plant
Complete Rieter Ring Spinning Plant, 24000 Spindles, 2005-6 12,000 Spindles
2005
2006...
1 Rieter, Murata Complete Ring Spinning Mill
Complete Ring Spinning Mill 01 X Rieter A11 Unifloc, Year 2003 01 X
1 Trützschler Complete Ring Spinning Mill With 16.032 Spindles2000, 2001
1 Rieter, Zinser Complete Ring Spinning Plant1993, 2002
1 Trützschler, Schlafhorst Complete Open End Mill With 1.500 Rotors2002
1 Rieter, Trützschler Complete Open End Mill With 2,900 Rotors, 2000, 2002
1 Trützschler, Vouk, Schlafhorst Complete Open End Spinning Plant1992, 2004
1 Schlafhorst, Trützschler, Rieter Complete Open End Plant1990, 2005
1 Rieter Complete Ring Spinning Plant2000
1 Rieter Spinning Mill Machinery2000, 2003, 2008
1 Trützschler Spinning Plant2008
1 Rieter Complete Cotton Spinning Plant 24000 Spindles2003
1 Rieter, Zinser Complete Ring Spinning Plant Of 21600 Spindles1998, 2002,
2006
6 Twisting Filament Twisting2005, 2006
1 Zinser, Nsc Schlumberger Worsted Spinning Mill 1987, 1993, 2000
1 Zinser, Nsc Schlumberger Complete Worsted Spinning Plant1995, 2002
1 Murata, Trützschler Complete Ring Spinning Plant Of 37300 Spindles1997,
2010
1 Rieter, Trützschler Spinning Plant For Coarse Yarns2001
1 Trützschler, Schlafhorst Open End Spinning Plant2002
Ring Spinning Complete Unit For Sale2005
Trützschler, Zinser Complete 17.0000 Spindle Ring Spinning Plant 2001-2006
Model2002, 2006
Rieter, Murata, Schlafhorst, Zinser Complete Plant 1995, 1996, 1997, 1998,
1999, 2000, 2001
1 Ring Spinning Acrylic Plant1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998,
1999, 2000

1
Complete Yarn Dye Plant with
(2) Thies Dye machines type Eco Master, 1500 kgs each – 2005 year
(3) Thies Dye machines type Eco Master, 1000 kgs each – 2005 year
(3) Thies Dye machines type Eco Master, 720 kgs each – 2005 year
(2) Thies Dye machines type Eco Master, 500 kgs each – 2005 year
(1) Thies Dye machines type Eco Master, 360 kgs each – 2005 year
(1) Thies Dye machines type Eco Master, 250 kgs each – 2005 year
(1) Thies Dye machines type Eco Master, 180 kgs each – 2005 year
(2) Thies Dye machines type Eco Master, 120 kgs each – 2005 year
(2) Thies Dye machines type Mini Soft, 50 kgs each – 1999 year
(1) Thies Dye machines type Mini Soft, 60 kgs each – 1999 year
(2) Thies Dye machines type Mini Soft, 25 kgs each – 1999 year
(1) Thies Dye machines type Mini Soft, 10 kgs each – 1999 year
(1) Thies Dosing Station with PLC controls and (14) dosing tanks and pumps
(1) Complete dye lab

1
Complete Embroidery Plant with
(1) Tajima machine Model TFGN-1520, 20 heads, 15 colors
(1) Tajima machine Model TMFD-915-S, 15 heads, 9 colors
(1) Tajima machine Model TMFD-G930, 30 heads, 9 colors
(3) Tajima machines Model TMFD-G918, 18 heads, 9 colors
(3) Tajima machines Model TMFD-920, 20 heads, 9 colors
(2) Tajima machines Model TMGN-1520, 20 heads, 15 colors
(1) Yue Ming Laser Model SM960 Automatic Positioning Label Cutting
machine – 2006 year
(1) Yue Ming Laser Model CMA 1680T Laser Cutting machine – 2006 year

Hygiene Plant
1 x Nuova Red Complete Hygiene Plant,
Type: AR/EL 85 S-ST   YOC: 1985 -1996   EL: 380/3/50, Baby diaper line and
automatic servo packaging machine for three sizes, size 3 MIDI (450 mm), size
4/5 Maxi/Maxi+ (485 mm), size 6 junior (540mm), upgrades for size 2 and min
can be easily manufactured.
Max speed 220 ppm, waste level: <4%, efficiency: >75%.
Blow Room, Spinning and Yarn  Lines
1 OERLIKON BARMAG POY Extrusion Line for Polyester -- 2011 year – 80
thread lines
(01) Horizontal Extruder (e-save) type 9E10, 90mm ø
(01) Continuous Polymer Filter (60 – 300 kg/hour)
(02) Spinning Heads type SP87D(DIO), 2 pos per module
(10) PC Spin packs/position
(08) Spinning Pump drive (1 extra)
(10) Spinning Pumps type GH30XK Planetary
(04) Eco Quench Radial Inflow system (suitable for micro denier)
(01) Spin Finish Supply system inc. 10 x Spin Finish pumps type GFD1XA-50
(01) Heat transfer installation inc Vaporization vessel of heating cap. 59.28kw
(01) Control panels, inverters, etc.
(08) Take up Winders type WINGS POY 40T-15
(01)  Spare winder

1 Hills Filament Spinning Lineyear 2001 Suitable For Fdy 2001
2 Marzoli, Trützschler, Murata Complete Ring Spinning Line1990, 1999, 2006,
2007
1 Rieter Cotton Spinning Line1997, 1998, 2000
1 Rieter Yarn Machines Line Before 1980, 2001
1 Sant’andrea, Nsc Schlumberger Preparation Line For Worsted Wool1994,
2000
1 Trützschler, Schlafhorst Complete Open End Spinning2002
1 Trützschler Complete Blowroom Line1999,, 2001
1 Trützschler Opening And Cleaning Line1988, 1995, 1996, 2000
1 Trützschler Line For Rigenerated Yarn1996, 2000
1 Zimmer Pilot Spinning Line For Industrial Yarn ES And PA1999. 2001
1 Zinser, Cognetex, Nsc Schlumberger Complete Yarn Line1984, 1998, 2001

Dye Machines
1 RAMISCH-GUARNERI Calendar Type RGK 360 – 2009 year,     2000mm roll
width,  3 bowl
Oil heated

7 MCS HT Dye Machines – 2003 year (new controls 2012),       All Machines
with high level reserve tank, Variojet nozzles,       Seam detection, continuous
double filter, (2) side tanks,       Automatic dosing system control       (2) Type
HT 150kg, single rope       (1) Type HT 300kg, 2 ropes       (1) Type HT 450kg, 2
ropes       (2) Type HT 600kg, 3 ropes       (1) Type HT 900kg, 5 ropes       

1 Complete HER TORONG (Taiwan) Fabric Dye plant with:       3 x Type HT-
OH-1600, 1600kg dye machines, 8 port – 2000 year       1 x Type HT-OH-1200,
1200kg dye machine, 6 port – 2000 year
3 x Type HT-OH-1200, 1200kg dye machines, 6 port – 1999 year       1 x 100 kg
Sample dye machine – 1997 year       1 x 50 kg Sample dye machine – 1997 year

Looms
12 PICANOL Air Jet Looms type Omni – 1999 year,       190cm width,       (4)
Type Omni F-2P,       (8) Type Omni F-4P,       Staubli cam shedding type 1600
with 8 cam capacity,       Each loom with: off loom batching and inspection, 6
harness frames,          7,000 drop wires/heddles, 2 weft feeders type IRO,          
No beams
9 PICANOL Air Jet Looms type Omni – 1998 year,      190cm width
Type Omni F-4-J,      Staubli electronic jacquard type CX880,      1408 hook
capacity, 1200 installed,      JC5 controller with M6 modules,      4 color weft,      
Each loom with: 7000 drop wires, 4 weft feeders, 2 cloth rolls,         Startess
harness (6696 ends including selvedges, 2010 year),         No beams, no gantry

3 SOMET Type Alpha HD looms – 2004 year,      210cm width,      Fimtessile
electronic dobby shedding type 7P, 20 shafts

3 SOMET Type Alpha looms – 2002 year,      210cm width,      Staubli electronic
dobby shedding type 2670, 20 shafts


11 PICANOL Rapier Jacquard Looms type Gamma 8/J – 2000/2001 year
340cm width,       8 color weft,       (6) type Bonas CSJ electronic jacquard
heads, 2688 hooks capacity, type 250 controls,       (3) type Bonas ASJ-4
electronic jacquard heads, 2688 hooks capacity, type 250 controls

4 DORNIER Rapier Jacquard Looms Type HTV8/J,
(1) 210cm – 1993 year            Grosse electronic jaquard, 2560 hooks capacity –
2005 year
(1) 220cm – 1993 year            Grosse electronic jumbo jacquard – 6272 hooks
capacity – 1993 year
(1) 230cm – 1994 year            Grosse electronic jaquard – 2560 hooks capacity –
2006 year
(1) 220cm – 1996 year            Grosse electronic jacquard – 2560 hooks capacity
– 2001 year

6 DORNIER Air Jet Jacquard Looms Type Air Jet LWV
(1) 330cm – 1994 year Grosse electronic jumbo jacquard – 4864 hooks capacity
– 1994 year
(1) 330cm – 1999 year  Grosse electronic jumbo jacquard – 9600 hooks capacity
– 1999 year
(1) 320cm – 1995 year Grosse electronic jumbo jacquard – 6400 hooks capacity
– 2011 year
(1) 330cm – 1996 year Grosse electronic jumbo jacquard – 6400 hooks capacity
– 2012 year
(1) 210cm – 1999 year Grosse electronic jacquard – 2560 hooks capacity – 2000
year
(1) 200cm – 1999 year Grosse electronic jacquard – 2560 hooks capacity – 2005
year

Tsudakoma ZAX R/S, 280, 340 Cm, Staubli dobby 2861 YOC 2000
16 Tsudakoma ZAX Dobby- 12 Set 340 Cm Tsudakoma ZAX R/S 4 color at will,
leno selvedge on loom take up built in tuck in drive option, 4 Set 280 Cm
Tsudakoma ZAX R/S 4 color at will, leno selvedge on loom take up built in tuck
in drive option

Tsudakoma ZAX R/S, 340 Cm, Staubli Positive Cam T1761, 2000Y, 34
Tsudakoma ZAX R/S 340 Cm, 2 color at will, leno selvedge on loom take up
built in tuck drive option

Tsudakoma ZAX E, 340 Cm, Staubli Positive Cam T1761 Yoc 200530
Tsudakoma ZAX E, 340 cm, 2 color at will, leno selvedge on loom take up built
in tuck drive option

Tsudakoma ZAX R/S, 280 Cm, Staubli Positive Cam T17618 Tsudakoma ZAX
R/S, 280 cm, 2 color at will, leno selvedge on loom take up built in tuck drive
option


Non Oven Plant Equipment
1 x HDB crosslapper, Ingoing width: 2500mm   Outgoing width: 2500mm   
YOC: 1985   EL: 380/3/50, speed 50 m/min

1 x Asselin crosslapper, Type: 380   Ingoing width: 2500mm   Outgoing width:
6000mm   YOC: 1985   EL: 380/3/50, speed 90 m/min, with two new belts.

1 x Asselin pre-needle loom, Type: DF 1500   Width: 5500mm   YOC: 1985   
EL: 380/3/50
hub 70 mm, max stroke frequency 750
1 x Dilo structural needle loom, Type: SD 45   Width: 4500mm   YOC: 1973   
EL: 380/3/50
For production of rib, velour and designed nonwovens. Single board,
downstroke, 4200 needles/lm, max 800 strokes/min, 60 mm hub, complete with
motor and two winding units as well as control panel and patterning device.

1 x Fehrer structural needle loom, Type: NL 11/SE   Width: 4400mm   YOC:
1988   EL: 380/3/50
for loop (rib), velour (high-loft) and pattern needling, stroke 30 mm, 1000
strokes/min, max speed 10 m/min. Including un-winding and up-winding unit.

Screen Printing Machine
1 BUSER Screen Printing Machine type Rotamac R5R 2400/10/08R – 2000 year
2400mm max printing width, (8) printing heads,   20m table length,       Repeat
range: 641 – 1018mm

Spinning Machines
1 Nsc Schlumberger Wollen Spinning Machine, Spinning Machines For Woollen
Yarns, 1992- 2001


1 Tearing Line – 2001 year
(1)  DELL’ORCO & VILLANI Tearing Machine,Type M/1900, 1900mm,  5
drum
With loading system
(6) MECCANICA CARRESI Boxes, all with fire detection/suppression
(1)  PAF Pneumatic transfer system + sleeve dust filter, composed of

Terry  Towel  Mc
Vamateks Terry Towel  260cm (4 pcs 1996)-(1 pcs 2000) years 8 colours ,      
With Fimtessile Electronical Dobby RD 820 RD 840   20/16/14,      14 Heald
frames,      02 weft Feeders ,      1warb Beams,1Cloth,      4,000Droppers,       
4,000 Healdless

Texturizing Machines
3 BARMAG DTY Texturizing Machines Model FK6-M900 – 1994 year
216 position, 2 heaters,       Heberlein Interlacing Jets type FT15
Friction Unit Type 8 (belt driven),       Unitens on line tensioning,  Manual
Doffing

3 BARMAG DTY Texturizing Machine Model FK6-M900 – 1987 year
216 position, 2 heaters,  Friction Unit Type 8 (belt driven)
Central Motor for both sides,       (1) frame Heberlein Interlacing Jets type FT15
Unitens on line tensioning,       Manual Doffing

Warper and Sizing
1 BENNINGER Direct Warper type ZC-R-1800 – 1990 year (revised 2001)
1800mm beam width x 1000mm beam ø
(1) “V” Type creel with 714 active positions, pretensioning
1 BENNINGER Direct Warper type Ben-Direct – 2011 year,       2000mm
working width
1 BENNINGER Creel type Ben-Sens – 1998 year,       630 positions,       
Electronic tensioning,
(32) warp beams with 1000mm beam head ø
1 ROTAL Sizing Machine – 1998 year,       4600mm headstock
1 BENNINGER Sectional Warper type Supertronic – 1996 year,  380cm width
(370cm working width),      No creel
1 BENNINGER/ZELL Sizing Range type BenSizetec – 2000 year      2400mm
width


Weaving Mill
No. 1 assembly winder OMP BODEGA, model AC 100/A, year 1995, 30
spindles, single sided, automatic doffing, overhead cleaner MAGITEX
No. 1 Two-For-One twister SAVIO, year 1985, 136 spindles
No. 1 warper GAGLIARDI e MILANI, year 1978, width 320cms, creel 480 ends
& creel 150 ends
No. 1 air compressor KAESER, mod. BSD81, year 2005, 45KW, 2.965 lt/min, 8
bar
No. 1 airconditioning system MAZZINI Italy, model SUPRA B2.00, year 2001,
installed in a weaving preparation & weaving room of 6.000m3 of space
volume, consisting of 2 lines  etc.,

Winders
56 BARMAG Filament Winders       (24) type SW4-SSD – 1984 year with 4 cops
each,       (32) type SW4-SLD – 1981 year with 2 cops each,       New inverter
drives installed 2011,       Operating Speed: 3250 rpm,       Max Speed: 3500 rpm

1 RITE (Italy) Precision Winder type RE-FLEX-W – 2008 year      60 positions
(3 x 20 spindle sections),      Electronic Tension control,      250mm stroke      
290mm bobbin,  Max speed: 1200 mt/m

1 RPR (Italy) Winder type GRB4/B – 2003 year, 32 positions,      4 ply creel,      
250mm max package
1 Cops Winder Saurer/Alma Lezzeni Clv150 (28 Spindles) Use For Cops Of 270
Mm, 2001- 2002


Related Sections:  Machinery, Systems and Chemicals for this sector

Note
If Buyers require above products or any others not in the above list or Sellers
wish to Export their Products, they should  E mail to krrao@sritecs.com giving
details of their requirements for SRITECS to send their offer.

Contact
K R Rao,URL: http://www.sritecs.com   E Mail:
krrao@sritecs.com  Tel/Fax:
+914027800610
JK Residency, East Marredpally, Secunderabad, Telengana, India- 500026,
New Delhi- 110058
Home